Conference Venue

The conference will be held in University of Engineering and Technology, Taxila. The University College of Engineering Taxila was established in 1975 but received its charter as an independent Public Sector University by the Punjab Government under the University of Engineering and Technology Taxila Ordinance 1993.

Taxila, ancient city of northwestern Pakistan, the ruins of which are about 22 miles (35 km) northwest of Rawalpindi or Capital Islamabad. The city's original name, Takshashila, referred to the predominant building material of the time: cut stone. It was first uncovered by archaeologist Alexander Cunningham in the mid-1800s, and it has been a UNESCO World Heritage Site since 1980. Taxila had a pivotal role in the Kingdom of Gandhara, which ruled the area from roughly 1000 BC to AD 1000. Several successive dynasties took control of Taxila after that, all hoping to capitalize on the city’s strategic location along a major commerce route through South and Central Asia. Buddhist ruins and artifacts from the historical period are the sole reason for the city’s notoriety. Nonetheless, Hindu and Jain sites and artifacts have been discovered here as well.

Conference Topics

Organizing Committee

Speakers

Professor Ir Dr Mohd Sapuan Salit

• Professor Ir Dr Mohd Sapuan Salit is an expert in mechanical engineering and composite materials. He is a prominent researcher in the field of natural fiber composites. His research and development work on various local natural fibers, particularly kenaf, has led to the commercialization and development of various products, including sugar palm plants for starch. This is evident by the commercialization of three patents and publications. He has published more than 500 publications. His h-index is 62 (Scopus), with a citation of 13,575. Professor Mohd Sapuan was a founding Head of the Advanced Engineering Materials and Composites Research Centre at UPM. He is currently the Head of the Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), UPM. This laboratory is part of HiCOE in Tropical Wood and Fibres. He was also the founding Chairman of the Society of Sugar Palm Development and Industry Malaysia. He was also the immediate Past President of the Asian Polymer Association based in IIT Dehli for ten years and serves as an Honorary Member of the association. He is the first and the only Malaysian elected as a Fellow of the Society of Automotive Engineers, International USA. As a reputed expert in natural fiber composites, he was invited to review over 1000 journal papers in his areas of expertise. He served as a reviewer of international grants for research agencies such as the Qatar Foundation, the Swiss National Research Foundation, the Research Council of Sultanate of Oman, the Dutch Research Council, the Austrian Science Fund, and many more. He also contributed as a member of the editorial board of international journals such as the Journal of Reinforced Plastics and Composites by Sage (Q2), Defence Technology by Elsevier/ KeAi China (Q2), IOP Functional Composites and Structures and Non-Linear Engineering by De Gruyter (Scopus). He organized 19 journals’ special issues as guest editor.

---

Dr. Vladimir Vukovic

• Dr. Vladimir Vukovic is a Senior Research Lecturer specializing in Building Information Modeling (BIM) and Energy Reduction in the Built Environment. With a diverse academic background spanning mechanical engineering, architectural engineering, and computational science, Dr. Vukovic earned his Ph.D. from Pennsylvania State University, focusing on predicting respiratory health impacts in office building environments. Before joining Teesside University, he held key roles in renowned organizations such as Exergy Ltd and the Austrian Institute of Technology, where he led impactful projects in energy efficiency and renewable energy. Throughout his distinguished career, Dr. Vukovic has been recognized for his outstanding contributions, receiving awards from institutions such as the Austrian Institute of Technology, ASHRAE, A&WMA, and more. His research interests encompass sustainable building design, BIM, digital construction twins, predictive controls, indoor environmental quality, and the integration of artificial intelligence in the built environment. Dr. Vukovic is currently leading the DTA3 project, worth an £11 million EU H2020 initiative, and has played pivotal roles in other notable projects, including inteGRIDy and eDREAM. Beyond his academic pursuits, Dr. Vukovic is actively engaged in external roles, serving as the Deputy Director of the Doctoral Training Alliance (DTA) in energy and contributing to research collaborations internationally. He has also founded V-LAB Ltd to commercialize research results and actively participates in industry-academia collaborations, demonstrating a commitment to knowledge valorization. In addition to his research endeavors, Dr. Vukovic is involved in teaching, currently leading modules in Advanced Project Planning and Visualisation within the Project Management master curriculum. His dedication to education extends to module leadership and guest lectures, showcasing a holistic approach to academia, research, and industry collaboration.

---

Dr. Müslüm Arıcı

• Dr. Müslüm Arıcı is a distinguished academic and researcher in the field of Mechanical Engineering. With a rich educational background, including a Ph.D. from Kocaeli University and a Research Master's from the von Karman Institute in Belgium, His expertise spans various aspects of thermal sciences and engineering. Currently serving as a Professor in the Mechanical Engineering Department at Kocaeli University, He has also held positions as an Adjunct Professor at Northeast Petroleum University in China and a Visiting Professor at institutions in Spain and Belarus. His research contributions are evident in several publications, including books, book chapters, and numerous articles in reputable peer-reviewed journals. Notably, his work encompasses diverse topics such as thermal energy storage, heat transfer enhancement, and the application of phase change materials for energy efficiency. His commitment to advancing knowledge in the sustainable energy area has been acknowledged with prestigious awards, including the Best Scientific Achievement Award of Kocaeli University and recognition as one of the top 2% of Scientists in Mechanical Engineering by Stanford University. In addition to his academic and research endeavors, he plays an active role in various editorial boards, contributing to the scholarly community.

---

Dr. Mohammad Ismail Hammouda

• Dr. Mohammad Ismail Hammouda is a Distinguished Professor in the Mechanical Engineering Department at Al-Azhar University, Cairo, Egypt. With a solid foundation forged through a Ph.D. from Cambridge University and a career spanning over four decades, he specializes in Mechanics of Materials, Stress Analysis, Finite Element Analysis, and Machine Design. His expertise extends to niche areas such as Dental Biomechanics, reflecting a comprehensive understanding of mechanical engineering principles. Throughout his academic journey, he has held key positions, including Vice-Dean of the Faculty of Engineering at Al-Azhar University, where I played a pivotal role in enhancing educational quality and technological integration. His commitment to advancing the field is evident through extensive research contributions, international journal publications, and conference participation. Moreover, his proficiency in computer programming, particularly in Visual Basic and JavaScript, underscores his dedication to innovative and technology-driven educational approaches. He brings a wealth of experience in teaching, research, and leadership, contributing to the academic landscape and the broader field of mechanical engineering.

---

Dr. Shoaib Ahmad Malik

• Dr. Shoaib Ahmad Malik is a Chartered Mechanical Engineer and accomplished researcher with a distinguished academic background. Throughout his academic career, he achieved first-class results and earned numerous honors and awards. Dr. Malik holds a Ph.D. in Mechanical Engineering from the University of Birmingham, UK, specializing in structural health monitoring of composite materials. Having acquired significant academic and industrial experience, Dr. Malik has been involved in world-renowned research centers and internationally funded projects. His expertise encompasses aerospace structures design & development, structural impact and dynamics, and R&D activities from concept to prototype and production. He managed programs requiring the integration of design, manufacturing, test lab activities, and data acquisition and analysis methods. In his role at Rolls-Royce plc. UK, Dr. Malik currently serves as a Principal Engineer in the Future Engine Programs division. He is actively engaged in assessing the structural integrity and dynamic response of the next generation of Large Civil aero engines. Dr. Malik's professional journey at Rolls-Royce began as a Stress Engineer in the Mechanical Integrity division, where he worked on the Next generation of Trent 1000 and Trent XWB Civil Aircraft engines. Dr. Malik has a strong academic background, serving as a Research Fellow and Lecturer at the University of Birmingham. He completed post-doctorate research on a Clean Filament Winding project and actively contributed to the academic environment by lecturing on Composite Materials micromechanics and basic theory. Throughout his career, Dr. Malik has demonstrated proficiency in various software tools and has undergone professional courses to enhance his skills. He is well-versed in LS-Dyna, ANSYS, MATLAB, NASTRAN, PATRAN, and Auto Mechanical Desktop. Dr. Malik's research contributions are notable, with publications in renowned journals and presentations at international conferences. He has pioneered work in self-sensing composites and has been recognized for his outstanding research by prestigious organizations such as the Engineering and Physical Sciences Research Council (EPSRC).

---

Prof. Dr. Mehmet Karahan

• Prof. Dr. Mehmet Karahan is a pioneering force in sustainable textiles, renowned for his transformative research and advocacy for eco-friendly practices. With over 25 years in the field, he has spearheaded innovative approaches to make textile production and consumption more sustainable. Prof. Karahan holds advanced degrees in Textile Engineering from Bursa Uludağ University, Turkey, where he delved into the intersection of sustainability and textiles. Prof. Karahan's research focuses on revolutionizing textile manufacturing processes, developing eco-friendly fibers, and promoting circular economy principles within the industry. Prof. Mehmet Karahan has authored numerous influential publications in the field of sustainable textiles, advancing our understanding of eco-friendly fiber technologies and promoting sustainable practices in textile manufacturing. His work has garnered widespread recognition, earning him many accolades in the field of Technical Textiles. Beyond academia, Prof. Karahan is a vocal advocate for sustainable practices in the textile sector, collaborating with industry partners to implement greener production methods. Prof. Mehmet Karahan is a visionary leader committed to driving sustainability in textiles, paving the way for a more eco-conscious future in the industry.

---

Dr. Shen Lida

• Shen Lida, Ph.D., is a Mechanical Manufacturing and Automation professor at the School of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics. He also serves as an assistant to the dean of the School of Mechanical and Electrical Engineering and deputy director of the Additive Manufacturing Research Institute at the same university. His research interests encompass additive manufacturing (3D printing), bio-manufacturing, and bionic robot manufacturing. He has led over 20 national, provincial, and ministerial level projects, authored more than 130 academic papers, with nearly 70 included in SCI, and holds 35 national invention patents, with over 20 more in application. Additionally, he has received six provincial and ministerial science and technology awards. Beyond his academic endeavors, Dr. Shen concurrently holds various leadership roles, including membership in the Test Method Sub-Technical Committee of the National Additive Manufacturing Standardization Technical Committee and deputy secretary-general positions in the Jiangsu Province 3D Printing Innovation Strategic Alliance and the Jiangsu Province 3D Printing Society (preparatory). He is also affiliated with the Jiangsu Province Biomedical Engineering Society's Intelligent Devices and Equipment Special Committee. In addition, he holds academic and social positions such as deputy chairman (preparation) of the Association, consultant for Nanjing Educational Equipment Technology, Suzhou Science and Technology Industry, and Zhangjiagang Free Trade Science and Technology. He serves as director of the Jiangsu office of the UK-China Economic and Cultural Promotion Association.

---

Prof. Dr. Yasir Nawab
Dr. Yasir Nawab, currently a professor (tenured), is a globally acknowledged researcher in the domain of textiles and composite materials. He did a Ph.D. in Mechanical Engineering with a focus on fiber-reinforced composite materials from Université de Nantes, France, and Post-doc & HDR (Habilitation à Diriger des Recherches) from the University of Le Havre Normandy, France. He is listed among the top 2% highly cited scientists worldwide by Elsevier in 2023. He has completed 24 funded R&D projects worth PKR. 158 million (One million USD), whereas 3 research projects worth PKR 231 million (1.8 million USD) are in progress. He is the founding Director of the National Centre of Composite Materials. He has authored over 150 peer-reviewed journal articles, 9 books, 3 patents, and 54 conference communications, including several keynote talks. Eleven Ph.D. and 55 MS Engineering students have completed their degrees under his supervision. He has been awarded HEC’s Best University Teacher Award in 2017, the Dice Leadership Award in 2018, and the National Engineering Excellence Award by IEP in 2024.

---

Prof. Dr. Nadeem Ahmed Sheikh
Dr. Nadeem Ahmed Sheikh is a prominent researcher and professor in mechanical engineering. He obtained his Ph.D. from Loughborough University in the UK. Dr. Sheikh served as the Dean of the Faculty of Engineering and Technology from November 2020 to February 2024 and instructs Energy Engineering at the International Islamic University. He is also a visiting professor at Aston and Teesside Universities in the UK. Dr. Sheikh has authored over 55 significant research publications in reputed international journals. He primarily concentrates on discovering cost-effective and environmentally friendly methods for energy production and enhancing power systems. He is interested in utilizing technology, such as AI and intelligent systems, to improve building energy efficiency. Furthermore, he co-founded and mentored several companies and start-ups, including Plasto-fuels, Circular Energies Pvt. Ltd, We Clean Pvt. Ltd, Carbon Queen, Smart Integrated Technologies and Eco-research Ltd.

---

Prof. Dr. Muhammad Tufail
Dr. Muhammad Tufail is a distinguished academic and engineering professional currently serving as the Pro Vice-Chancellor at NED University of Engineering and Technology in Karachi, Pakistan. With a wealth of experience and expertise in mechanical engineering, he has made significant contributions to academia and industry. Dr. Tufail has held various academic and administrative positions at NED University. His leadership and expertise have fostered academic excellence and innovation within the university. He has published numerous research papers and articles in reputed journals, showcasing his mechanical engineering and manufacturing systems expertise. Dr. Tufail's research and academic contributions have significantly impacted the advancement of engineering education and practice in Pakistan. Dr. Tufail is a Chartered Engineer (C. Eng) and a Fellow of the Institution of Mechanical Engineers (FIMechE), reflecting his commitment to professional standards and continuous learning. Outside of his professional endeavors, Dr. Tufail is known for his dedication to mentoring students and young engineers, guiding them toward successful careers in engineering. He is passionate about promoting STEM education and fostering innovation in engineering and technology.

---

Prof. Dr. Muhammad Abid
Prof. Muhammad Abid has been Director of Interdisciplinary Research, Campus Director, Chairman, and Professor of Mechanical Engineering in COMSATS University Islamabad for the last 4.5 years. Over the last almost 18 years, he has served as one of the best teachers, researcher, and administrator. He served as Dean and Professor at GIK Institute for over three years. He holds valuable industrial and professional experience in one of the largest engineering concerns in Pakistan, having worked there for more than eight years. He has supervised 5 Ph.D. and 40 MS students, published 12 books, 116 journal papers (with an Impact factor of >100), 12 books, five book chapters, and more than 155 conference papers. Prof. Abid brought international and national funded projects with innovative ideas and substantial amounts from various funding agencies, defense, and industry. In recognition of his contribution to the field of Engineering and Technology, he has won several prestigious awards. With solid industrial linkages, he has recently vitalized a mega project with the defense sector and signed a MoU to provide real-world solutions to national needs. He is a Fellow of IMechE, Vice Chair of the Pak Chapter, a Lifetime member of the Pakistan Engineering Council, and an OBE-based accreditation team expert.

---

Dr. Mohsan Haider
Dr. Haider is an accomplished composites engineering manager with over eighteen years of experience in composite product design, process development, product validation, transition to production, lean composite manufacturing, composite repairs, composite quality assurance, composite material characterization, qualification, and optimization. Dr. Haider has in-depth knowledge and understanding of composite manufacturing process development and optimization. His extensive experience includes composite part & tool development, composite manufacturing, quality assurance, coupon & full-scale testing, and composite repairs for aerospace, wind energy, and automotive applications. He has also been involved with setting up and qualifying composite processing equipment in a controlled contamination area, such as a clean room. Dr. Haider holds a Ph.D. in Mechanical Engineering specializing in composite structures. He is certified by the Lean Six Sigma Greenbelt and has formal training in engineering project management. Dr. Haider has successfully managed multimillion-dollar composite engineering projects from design to final implementation and production qualification. Dr. Haider is a subject matter expert on Boeing BAC5578 and BAC5657 composite manufacturing specifications.

---

Dr. Taqi Ahmad Cheema
Dr. Taqi is a distinguished figure in the field of Mechanical Engineering, with a remarkable track record of academic excellence and research contributions. Serving as Principal Investigator, Dr. Taqi secured funded research projects and grants totaling PKR 12.86 million, alongside winning an additional PKR 10.52 million as co-Principal Investigator. His dedication to scholarly pursuits is evident in the publication of over 50 articles in impactful journals, out of a total of 60 journal publications. In addition to his research expertise, Dr. Taqi is a highly regarded educator, consistently earning an excellent reviews in annual performance evaluations for the past five years. His commitment to teaching excellence has earned them accolades such as the Institutional Best Teacher Award in 2020 and 2021, along with being nominated for the National Best Teacher Award twice. Furthermore, Dr. Taqi has made significant contributions to curriculum development, serving as secretary of the National Curriculum Review Committee for Mechanical Engineering and as a member of similar committees for Energy Engineering. He also actively contribute to industry partnerships and student initiatives, serving as an advisor for various university chapters and teams. Dr. Taqi's journey of academic excellence began with scholarships for MS and PhD studies in prestigious universities in Korea, reflecting their dedication to advancing knowledge in Mechanical Engineering.

---

Dr. Muhammad Ramzan Abdul Karim
Dr. Muhammad Ramzan Abdul Karim is an esteemed academician and researcher renowned for his contributions to the field of Material Science and Engineering. He holds a Ph.D. in Science and Technology of Materials and is a faculty member at the Ghulam Ishaq Khan Institute of Engineering Sciences and Technology (GIKI). Dr. Karim's research interests span various topics, including CNT/Graphene nanocomposites for energy storage devices, composite materials, corrosion degradation, and protection. He has completed three funded R&D projects worth PKR 20 million, whereas research projects worth PKR 5 million are in progress. He has authored over 50 peer-reviewed journal articles and 30 conference communications, including several keynote talks. With a passion for innovation and a commitment to excellence in education, he plays a pivotal role in shaping the minds of future engineers and scientists. Dr. Karim's dedication to teaching and research has earned him recognition and respect within the academic community. He inspires students and colleagues alike, driving advancements in his field and significantly impacting the world of Materials Engineering.

---

Prof. Dr. Mohsin Ali Raza
Dr. Mohsin Ali Raza has more than 20 years of research and teaching experience in the field of Metallurgy and Materials Engineering. He received his PhD in Materials Engineering from the University of Leeds, UK 2012. After completing his PhD, he established his research group at the Institute of Metallurgy and Materials Engineering, University of the Punjab, actively researching carbon nanomaterials, graphene, polymer composites, ceramics materials, and energy materials. Dr. Raza has worked on several industrial research projects at the University of Punjab and supervised many MPhil, MSc., and B.Sc (Engg.) research thesis. He is currently supervising 5 PhD students. In 2014, he won a grant of PKR 17 million from HEC to conduct research on a project, “Synthesis of graphene nanoplatelets and development of graphene-nanoplatelets-based composites for electronic packaging and functional applications,” which was successfully completed. Dr. Raza played a crucial role in establishing state-of-the-art Materials Characterization laboratories at IMME. He also authored more than 40 research articles published in peer-reviewed impact factor journals and presented papers in more than 20 international conferences. His cumulative impact factor is 140. He is actively involved in teaching B.Sc. (Engg.), MSc (Engg.), and PhD (Engg.) courses at the Institute of Metallurgy and Materials Engineering, University of the Punjab, Lahore. He also performs his duties as Director of the Institute of Metallurgy and Materials Engineering.

---

Dr. Hafiz Farhan Maqbool
Dr. Hafiz Farhan Maqbool received a B.Sc. (Hons.) degree in Mechatronics and Control Engineering from the University of Engineering and Technology, Lahore, Pakistan, an M.Sc. degree in Mechanical Engineering from Korea Advanced Institute of Science and Technology, South Korea, and a Ph.D. degree in Mechanical Engineering from the University of Leeds, U.K. He is currently working as an Associate Professor with the University of Engineering and Technology, Lahore (Faisalabad Campus), Pakistan. In addition, he is the Co-Principal Investigator (Co-PI) in the Prostheses domain within the Human-Centered Robotics Lab (HCRL) at UET Lahore, a part of the National Centre of Robotics and Automation (NCRA). This project, supported by an HEC grant of approximately PKR 84 million, is currently underway. His research interests include biomechatronics, lower limb biomechanics, prosthetics/orthotics, machine learning, and assistive robotics.

---

Prof. Dr. Emad Ud Din
As a tenured professor and former head of the Mechanical Engineering Department at NUST, he is recognized for his research and teaching excellence, which is evident in his receipt of the Best Teacher Award in 2023. His primary role involves bridging theoretical research with practical industrial applications to prepare engineers for real-world innovation. His academic journey, from B.Sc. at UET Taxila to Ph.D. at KAIST, has been marked by impactful research, including power generation and biomedical device projects. Proficient in computational tools like ANSYS and COMSOL, as well as programming languages like Fortran and Python, he actively drives innovation in sectors such as applied physics, renewable energy, and biofluidics. At NUST, he has facilitated the deployment of advanced laboratory equipment and overseen the establishment of facilities for advanced manufacturing. This holistic approach underscores his commitment to advancing mechanical engineering and benefiting industry and the wider community.

---

Prof. Dr. Rizwan Mehmood Gul
Dr. Rizwan M. Gul is a respected figure in Mechanical Engineering at the University of Engineering and Technology (UET), Peshawar, where he has served since October 2008. Over the years, he has held key positions, including Chairman of the Department of Mechanical Engineering, Secretary of the Board of Advanced Studies and Research (BOASAR), and Director of the US-Pakistan Center for Advanced Studies in Energy (USPCAS-E). Dr. Gul has demonstrated a steadfast commitment to academic excellence, research, and administrative leadership throughout his tenure. He has played a pivotal role in curriculum development, research project supervision, and establishing academic programs and centers. Dr. Gul's visionary leadership has fostered innovation and collaboration within the university community. His efforts have significantly contributed to advancing postgraduate education, research, and technology development at UET, Peshawar. Beyond his administrative roles, Dr. Gul is highly regarded for his teaching prowess and academic contributions. He has taught a variety of undergraduate and graduate courses, mentored students, and contributed to the scholarly community through his research and publications. Dr. Gul's exemplary dedication and leadership have left an enduring legacy at UET, Peshawar, inspiring generations of students and scholars in Mechanical Engineering.

---

Prof. Dr. Umar Shahbaz Khan
Dr. Umar Shahbaz Khan earned his bachelor’s in Mechatronics Engineering from the College of Electrical and Mechanical Engineering, National University of Sciences and Technology, in 2005. After graduating, he served at Siemens Pakistan for nine months as an engineer, and during this short period, he was actively involved in many national-level projects. In 2006, he left for his PhD at the University of Liverpool, UK under NUST faculty development scholarship. He completed his PhD in 2011 at the young age of 28 years. He joined the college of E&ME as Assistant Professor in April 2011. He remained the Head of the Mechatronics Engineering Department from Nov 2015 to Jan 2020. He has completed an Ignite-funded project worth 14.12 million on “Myo Electric Prosthetic Upper limb,” the product of which is commercially available as myobionics. He is also the National Centre of Robotics and Automation (NCRA) project director, which is worth 1.295 Bn. NCRA is a consortium of 11 labs established over 13 universities. His research interests include prostheses, embedded systems, robotics, and image processing.

---

Dr. Noman Naseer
Dr. Noman Naseer is a distinguished figure in the field of Mechatronics Engineering, specializing in Robotics, Artificial Intelligence, and Brain-Computer Interface (BCI) technologies. Holding a PhD from Pusan National University, Korea, he has served in various academic roles at Air University, Islamabad, and as a visiting professor at international institutions in Vietnam and Indonesia. Dr. Naseer's pioneering work in Functional Near-Infrared Spectroscopy (fNIRS) and BCI has earned him global recognition, including prestigious awards like the Best University Teacher Award and the Albert Nelson Lifetime Achievement Award. He is consistently ranked among the top scientists worldwide and has secured numerous research grants, including notable collaborations with the City University of Hong Kong. Dr. Naseer's extensive contributions extend to editorial roles in esteemed journals and engagements as a keynote speaker at international conferences. His research publications, often awarded for their impact, exemplify his commitment to advancing technology for neurorehabilitation and human-machine interaction.

---

Prof. Dr. Adeel Waqas
Dr. Adeel Waqas is the US Pakistan Center for Advanced Studies in Energy (USPCAS-E) Principal at the National University of Science and Technology (NUST) in Islamabad, Pakistan. With a Ph.D. in Energy Technology from the Asian Institute of Technology, Thailand, and postdoctoral training in Solar Energy from the University of Science and Technology of China, Dr. Waqas is a seasoned expert in renewable energy. His academic journey began with a Bachelor's in Mechanical Engineering from the University of Engineering and Technology in Lahore, Pakistan. Throughout his career, Dr. Waqas has focused on Thermal Energy Storage, Solar Thermal Energy Systems, and Energy Efficiency, publishing over 40 articles in international journals and presenting 15+ conference papers. His research, cited over 2400 times on Google Scholar, has earned him recognition, including prestigious fellowships from the Chinese Academy of Sciences and the Higher Education Commission of Pakistan. Dr. Waqas has secured substantial research grants, collaborating with organizations like the World Bank and USAID to advance projects ranging from energy transition for climate resilience to solar space heating. With his expertise and commitment to sustainable energy solutions, Dr. Waqas remains at the forefront of Pakistan's renewable energy research and implementation.

Important dates

Call for Paper

Publication

The conference will feature keynote talks, technical papers and poster presentations. The Technical Committtee will decide the mode of presentation(oral or poster; the authors may, however , indicate their preference.

The prospective authors are invited to submit papers with original and novel research results consisting of a maximum of 5-8 pages in English Selected papers will be published as a special issue in the Technical Journal UET Taxila (Y-Catagory)

Conference Registration

The conference registration will start from March 30, 2024, and will end on.

It is mandatory for all accepted papers that at least one of the authors of a paper, denoted as presenting author, complete the paper registration before the deadline  July 20, 2024. The accepted papers that are not registered by the deadline shall be considered as withdrawn.

A person (other than presenting author) interested in participating the conference must also register as a participant.

The registration fee for different categories is given as follows.

Submission

Abstract Template for ICAME 2024

Submission Guidelines for ICAME 2024

Programme

Downloads

Brochure for ICAME 2024

Abstract Template for ICAME 2024

Submission Guidelines for ICAME 2024