University of Engineering and Technology, Taxila


UET Taxila
 

Labs Infrastructure

The department has eleven laboratories which have state-of-art equipment to fulfill the needs of Electronics Engineering. The list of Labs is given below:

Electronics laboratory is to provide an environment to the students at Electronics Engineering department where they can perform the most basic experiments related to electronic circuits. In addition to this, students are introduced to the functionality and usage of state-of-the-art electronic equipment. This lab supports the practical experiments of the multiple courses including Electronics Circuit Design, Linear Circuit Analysis, Circuit Analysis-I, Circuit Analysis-II, Basic Electronics Engineering. There are seven workstations equipped with the technologically advanced equipment including Oscilloscopes, Arbitrary Waveform Generators, Programmable Digital Power Supply, Portable Analog Digital Trainer, and Digital Multimeter. These workstations are the best known for their ability to verify the concepts analog electronics.

Lab Organogram:

Lab Director                           

Engr. Adil Usman      

Lab Engineer  

Engr. Hafiza Misbah Younis 

Lab Supervisor

Mr. Muhammad Ashfaq

Lab Attendant

Mr. Sabir Hussain

Semester-Wise Lab Courses Conducted in Respective Lab:

Semester

Course

Semester 1

Linear Circuit Analysis

Semester 2

Basic Electronic Engineering, Circuit Analysis-I

Semester 3

Circuit Analysis-II, Electronic Circuit Design

Workshop/project Lab is equipped with all the basic electronic equipment which is used for electrical wiring and electronic circuits. Use of tools used by electricians, wiring regulations, types of cables and electric accessories including switches, plugs, circuit breakers, fuses etc., symbols for electrical wiring schematics e.g. switches, lamps, sockets etc., drawing and practice in simple house wring and testing methods, wiring schemes of two-way and three-way circuits and ringing circuits, voltage and current measurements. Electric soldering and soldering tools; soldering methods and skills, PCB designing, transferring a circuit to PCB, etching, drilling and soldering component on PCB testing. Students work on Final Year and Semester Projects in this lab throughout the year. Training session Human and Machine Safety is also conducted in this Lab i-e concepts in electrical safety, safety regulations, earthing concepts, electric shocks and treatment.

Lab Organogram:

Lab Director

Engr. M. Atif Imtiaz

Lab Engineer

Engr. Shujaat Hussain Shah

Lab Supervisor

Mr. Masood-ul-Hassan

Digital Electronics laboratory is to provide facility to the students at Electronics Engineering department where they can perform the experiments related to Digital Electronics Environment. In addition to this, students are introduced to the functionality and usage of state-of-the-art National Instruments electronic equipment. This lab supports the practical experiments of the multiple courses like Integrated Electronics and Digital Logic Design. There are six workstations equipped with the technologically advanced equipment including NI ELVES-II Hardware & Software, PC based instruments, Advanced Programmable Digital Power Supply, Advanced Digital Multimeter, NI Lab View Software. These workstations are the best known for their ability to verify the concepts of digital electronics.

Lab Organogram:

Lab Director

Engr. Adil Usman

Lab Engineer

Engr. Hafiza Misbah Younis

Lab Supervisor

Mr. Muhammad Ashfaq

Lab Attendant

Mr. Sabir Hussain

Semester-Wise Lab Courses Conducted in Respective Lab:

Semester

Course

Semester 3

Digital Logic Design

Semester 5

Integrated Electronics

The Computer Lab is an open, general-purpose and well-equipped lab providing computer technology as well as technological support for effective computing to help students in completing course work. The Computer Lab offers a variety of hardware and software for student use that setup to support courses at Department of Electronics Engineering.

Lab Organogram:

Director

Engr. Zohaib Hassan Naqvi

Lab Engineer

Engr. Muhammad Umar Khan

Junior Programmer

Mr. Muzammal Majeed

Lab Attendant

Mr. Karamat Khan

Lab Courses:

  • Digital Image Processing……………………………..............................                  (7th Semester)        
  • Signal Processing…………………………………………………………………… (5th Semester)                                   
  • Computer Fundamentals & Programming……………………………… (1st Semester)
  • Object Oriented Programming……………………………………………… (2nd Semester)
  • Signals & Systems…………………………………………………………………. (5th Semester)

The Computer Lab-II  is also an open, general-purpose and well-equipped lab providing computer technology as well as technological support for effective computing to help students in completing course work. The Computer Lab offers a variety of hardware and software for student use that setup to support courses at Department of Electronics Engineering.

Lab Organogram:

Lab Director

Engr. Zohaib Hassan Naqvi

Lab Engineer

Engr. Muhammad Umar Khan

Junior Programmer

Mr. Muzammal Majeed

Lab Attendant

Mr. Abdul Waheed

Lab Courses:

  • Fundamental of Computers…………………………….............................. (1st Semester)        
  • Communication Skills…………………………………………………………………… (3rd Semester)                                   

Control Systems Laboratory provides a “hands-on” environment that is crucial for developing students’ understanding of theoretical concepts. Instrumentation and Control laboratory is housed with different instruments like temperature measurement, level detection, pressure measurement, flow measurement etc. and Controllers like HVAC Trainer for Temperature, DC Motor Trainer for Speed and Position Control and Coupled Tank for the Level Control. On different modes these are arranged in different control configurations to achieve specific control objectives.

Lab Organogram:

Lab Director

Dr. Khawaja Shafiq Haider. 

Lab Engineer

Shujaat Hussain Shah

Lab Supervisor

Mr. Masood-ul-Hassan

Lab Attendant

Muhammad Fiaz

Lab Courses:

Semester

Lab Course

5

Instrumentation & Measurement, Control System

The Digital Signal Processing and Communication Lab is a teaching lab established with the objective of advancing the conceptual understanding of students and researchers. The lab focuses on the concepts of filter design, spectral analysis and the transform domain techniques of system and signal analysis using hardware implementation on DSP processors. The lab is also equipped for training students in analogue and digital communication course using NI Emona DATEx trainers.

Lab Organogram:

Director

Dr. Aamir Rashid

Lab Engineer

Engr. Muhammad Umar Khan

Supervisor

Muzammal Majeed

Lab Attendant

Tahir Nadeem

Lab Courses:

  • Analog and Digital Communication
  • Digital Signal Processing
  • Computer Architecture

Embedded systems lab provides students with hands-on experience on design of digital systems that range from simple logic circuits to advanced microcontroller and microprocessor-based systems. The lab comprises of ten workstations, each of which is equipped with a digital trainer system, power supply, function generator, and an oscilloscope.

There is also a complete setup for design of microcontroller-based systems, which includes the necessary software and hardware programming tools.  Lab facilities are also utilized by the students for their final year projects related to microcontrollers and digital systems

Lab Organogram:

Lab Director

Dr. Usman Masud

Lab Engineer

Engr. Sumair Aziz

Lab Supervisor

Mr. Farhan Ghafoor

Lab Attendant

Mr. Tahir Nadeem

Lab Courses:

Semester

Lab Course

1

Microprocessors and Microcontrollers

2

Embedded System Design

VLSI Laboratory formerly known as Center of Excellence for ASIC Design and DSP is the state-of-the-art facility, equipped with hardware and software tools for High Speed Digital System Architectures, Chip Designing, and Simulations. This single lab covers implementation of Digital Logic, FPGA based Digital Systems Design, Computer Architecture and Digital Signal Processing applications. This lab is equipped with Xilinx FPGAs (Artix VII, Vertex IV, Spartan VI &III) with Verilog as the core HDL. MICROBLAZE, PICOBLAZE AND POWER PC are embedded processors covered in advanced courses. Test and measurement equipment for advanced testing and verification are also available

Lab Organogram:

Lab Director

Dr. Syed Azhar Ali Zaidi

Lab Engineer

Engr. Sumair Aziz

Lab Supervisor:

Mr. Farhan Ghafoor

Lab Attendant

Mr. Muhammad Yaqoob

Semester wise labs- Table:

Semester

Lab Course

1

Computer Aided Engineering Design

2

FPGA Based System Design

3

Computer Architecture

4

VLSI Design

To familiarize students with instrumentation, measurement techniques and data analysis and allow them to perform laboratorial work in Electronics and Instrumentation

Lab Organogram:

Lab Director

Engr. Adil Usman

Lab Engineer

Mr. Muzammal Majeed

Lab Courses:

Instrumentation & Measurement

Academics

 

 
University of Engineering and Technology Taxila, Department of Electronics Engineering, 051 9047721
 

About the university

The University campus is located on the outskirts of Taxila at a distance of 5 km from the city. It is situated near railway station Mohra Shah Wali Shah on Taxila-Havelian branch line....

Important websites

HEC Pakistan
Higher Education Commission Pakistan
PEC Pakistan
Pakistan Engineering Council

About Electronics Engg. Dept.

The Department of Electronics Engineering started in 2010 with an enrollment of 60 undergraduate students per year. The department is housed in the historic building of laboratory block....
UET Taxila